Tieline MPX II
Tieline MPX II Codec provides support for single or dual MPX Composite Encode and Decode MPX/µMPX composite, also provides return FM Audio monitoring feed. With hitless packet redudancy and optional DVB SII Satellite Tuner Module
- Preis und Verfügbarkeit
- Produktbeschreibung
- Zubehör
Beschreibung
Tieline’s MPX I and MPX II codecs deliver composite FM multiplex (MPX) codec solutions for real-time network distribution of FM-MPX or MicroMPX (μMPX*) signals to transmitter sites. The MPX I is ideal for transmitting a composite STL signal from a single station with return monitoring, whereas the Tieline MPX II can transport two discrete composite FM-MPX signals from the studio to transmitters with return monitoring.Overview...
Both the MPX I and MPX II support sending the full uncompressed FM signal, or compressed μMPX to deliver high-quality multiplexed FM signals at lower bit-rates. They support analog MPX (BNC) or MPX over AES192 to deliver a wide range of flexible composite encoder and decoder configurations for many different applications. Order an optional satellite tuner card at purchase to support decoding DVB-S or DVB-S2 signals.
Features at a glance...
- SD card backup : SD card backup delivers file failover.
- Dual Ethernet Ports : Dual Gigabit (10/100/1000) RJ-45 LAN ports for IP Streaming / Control
- Dual Internal Power Supplies : Dual Power Supplies to protect you in case one fails
- Multicast & Multi-Unicast* : Multi-unicast μMPX signals to reduce CAPEX and OPEX at the studio and TX sites. Multicast uncompressed MPX or compressed μMPX signals
- Redundant streaming : Redundant streaming with hitless packet switching, RIST and Forward Error Correction (FEC)
- Support for GPIOs : Support for GPIOs in MPX or μMPX modes.
- Full remote control : Full remote control using the HTML5 Toolbox Web-GUI, Cloud Codec Controller, plus comprehensive automated alarms and SNMP monitoring.
- Analog and Digital : Support for both analog and digital MPX signals allows networks to support transmissions using analog transmitters as networks transition to newer all-digital setups over time.
- Monitor demodulated MPX : Monitor demodulated MPX at the encoder or decoder.
- Transport Compressed μMPX : Transport uncompressed MPX or reduce bandwidth requirements by transmitting compressed μMPX Composite signals to sites.
- MPEG-TS over Satellite : An optional satellite tuner card with MPEG-TS and MPE support can receive DVB-S or DVB-S2 signals
- Return FM Monitoring : Monitor demodulated MPX locally, or stream an external signal at the decoder back to the encoder for monitoring.
Sending transmission-ready FM composite signals from the studio allows broadcasters to maintain audio processing and RDS data insertion at the studio. This significantly reduces capital and operational costs by eliminating processing equipment from transmitter sites, which reduces on-site power consumption, wiring and space requirements, as well as site visits for service and support. Composite MPX over IP signals can be easily replicated and distributed using multicast and multi-unicast^ technologies and take advantage of rock solid redundancy features like redundant streaming, RIST, FEC, and automated SD card file failover.
Spezifizierungen
MPX II Rear Panel Input and Outputs- RJ-45 Analog/AES3 Inputs 1 & 2 : 2 Shared Stereo Analog Line Inputs or 2 x stereo AES3 Inputs
- RJ-45 Analog/AES3 Outputs 1 & 2 : 2 Shared Stereo Analog Line Outputs or 2 x stereo AES3 Outputs
- RJ-45 AES192 MPX Inputs/Outputs 1 & 2 : 2 Stereo AES192 Digital MPX Composite Inputs and Outputs
- BNC Analog Input 1 & 2/Outputs 1-4 : 2 BNC Analog MPX composite Inputs and 4 BNC Outputs (2 A & B outputs)
- DB-25 Serial Port : 4 x Serial I/O Ports
- Optional DVB Satellite card/module : DVB-S/S2 RF1 Input and RF2 Output via F connectors
- Gigabit RJ-45 LAN1 and LAN2 Ports : Gbit Ethernet ports for Control/IP streaming over WANs
- Gigabit RJ-45 LAN3 Port : Gbit Ethernet port for Control
- Gigabit RJ-45 AoIP/LAN4 Port : Gbit Ethernet AoIP/LAN4 Port
- BNC Sync Input/Output : 2 configurable Input/Output BNC sync connectors
- Female DB-25 Control Port In/Out : DB-25 Control Port I/O Supporting: 4 GPIOs in MPX I; 8 GPIOs in MPX II
- Front Panel Headphone Output : 1 x 6.35mm (1/4”) headphone Jack
- Front Panel SD Card Slot : Full size SD card slot for firmware upgrades and backup files
- Configure, Control, and Monitoring : HTML5 Toolbox Web-GUI, Cloud Codec Controller (CCC)
- Serial (DB-25) : 2 x RS-232 in MPX I (2 sync with audio); 4 x RS-232 in MPX II (4 sync with audio) up to 115kbps with or without CTS/RTS flow control can be used as a proprietary data channel; supports hardware and software flow control
- Hardware / Software Logic I/Os (SLIO) : Support for software logic I/Os
- Demodulated Audio Monitoring : Demodulate MPX for local monitoring, or stream external stereo signal at the decoder back to encoder for remote monitoring (using Opus)
- Front Panel PPMs : Front Panel PPMs to monitor MPX levels or input/outputs: 4PPMs in MPX I; 8 PPMs in MPX II
- Front Panel LEDs : Configurable Alarm and User LEDs with Connection and Power LEDs
- Embedded HTML5 Web Server : HTML5 Toolbox Web-GUI used for configuration and control of all functions including alarms
- Comprehensive Alarms : Configurable alarms including automated silence detection, PSU, connection, temperature, AES input, AES reference, loss of pilot
- SNMP : Support for SNMP monitoring and traps via SNMP v1 and SNMPv2c
- MPX Encoding/Decoding :
- 16-bit (2.3 Mbps) and 24-bit (4.6Mbps) Raw MPX;
- μMPX 320, 340, 360, 384, 400, 448, 512, 576, 640, 704, 768, 800, 900 kbps;
- Support for μMPX v1, 2, 3 and 4
- Sampling frequency: 192kHz
- MPX Buffer : 0 to 10 seconds
- MPEG-TS Encoding/Decoding : DVB-S and DVB-S2 supported via optional DVB module; 16, 24 and 32-bit PCM at 96kHz;
- FEC : Selectable FEC 15% -100% with time delay
- Protocols : RTP, DHCP, SNMPv2c, DNS, HTTP, IGMPv3, IPv4/IPv6, RTCP, SSL Security Certificate, RIST
- Redundant Streaming : Primary plus automatic failover to 1 SmartStream MPX/μMPX redundant stream per stream with hitless packet switching at the decoder, RIST
- Jitter Buffer Management : 5 automated, or fixed/static jitter buffer settings for IP stream monitoring
- Multi-unicasting[1] : Support for Multi-unicast streams
- Multicasting : Support for Multicast streams to unlimited endpoints over compatible IP networks
- Standard Modulation/Symbol Rate : QPSK: 1~60 Msps; 8PSK: 1~60 Msps; 16APSK: 1~58 Msps ; 32APSK: 1~58 Msps ; 64APSK: 1~34 Msps
- Modulation Type : VCM, ACM
- Roll-off : Roll-off factors from 0.05 to 0.35
- FEC : Normal (64800 bits) FECFRAME supported
- Transport Stream Processing : Single Transport Stream, Multiple Transport Stream
- Data Forwarding : IP
- AES67 Compliant : Compliant with Audio Engineering Society standards for AES67
- ST 2110-30 Compliant : Class A, Ax, B, Bx Sender and Receiver Compliant
- RAVENNA Compliant : Supports RAVENNA Stream Discovery and Advertisement
- Livewire Compliant : Natively supports Livewire+ for AoIP Streaming
- NMOS Compliant : NMOS IS-04 & IS-05 Discovery, Registration and Connection Management
- Supported Audio Frames : 125ms, 250ms, 333ms, 1ms, 4ms
- Clock Modes Supported : Primary Leader, Follower, Follower Only
- VLAN Tagging : IEEE 802.1Q, 802.1p
- Quality of Service (Q0S) : Support for DiffServ (DSCP)
- Synchronization : EEEE1588-2008 (PTPv2)
- Multicasting : IGMP v2 and v3
- SAP : SAP v2 (Session Announcement Protocol) as defined in RFC 2974
- Display : 24-bit Color LCD Screen (480 x 128 pixels)
- Keypad : 26 button silicon keypad
- Navigation : 5 navigation and selection buttons
- Size : 1U x19” Rackmount
- Dimensions : 19” x 1 3/4” x 11 13/16” [482mm (W) x 44.45mm (H) x 300mm (D)] excluding rear connectors
- Weight (including Satellite Module) : 4.08kg/8.99 pounds
- AC Power : Dual AC 90-240V IEC power inlets; 2A 50-60 Hz
- Operating Temperature : 0°C to 45°C (32°F to 113°F)
- Humidity Operating Range : 10% ≥ RH ≤ 90% (0 to 45°C/32°F to 113°F), non-condensing
Artikelnummer : MPX2
https://www.youtube.com/embed/ZsZdfppDfiQ?autoplay=1&hl=fr_FR&fs=1&rel=0
Erwägen Sie den Kauf dieses Zubehörs
Dies ist eine Einladung zur Offertstellung. Lieferumfang gemäss Herstellerangabe mit Herstellergarantie; Bilder und Texte können abweichen. Versandkosten basieren auf einem Gewicht von ?.