Informationen
Konto
PocketWizard Anschlusskabel 30 cm, Miniphone 2.5 mm (m) auf Elinchrom (m)
- Preis und Verfügbarkeit
- Produktbeschreibung 1
- Produktbeschreibung 2
- Zubehör
Kabel für Elinchrom
Synchrokabel zur Auslösung eines Elichrom Blitzgerätes mit einem PocketWizard Transceiver Geht für: Elinchrom Digital RX Series Elinchrom Digital Style Series Elinchrom Style S Series Elinchrom Micro AS packs Elinchrom Ranger Series Elinchrom Classic packs Description: This cable contains a pre-trigger switch. When enabled, the camera behaves as if the camera's shutter release button were held half-pressed continuously. This makes the camera respond more quickly and consistently, but also consumes the camera's batteries much more quickly. When disabled, this cable functions identically to the N-MCDC2. This P cable works with most PocketWizard radios. This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely. A standard cable works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only. A ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions, as well as relay E-TTL signals to compatible flashes when using FlexTT5s. Compatible with the following radios: Plus II: Use this cable to remotely fire your camera. Plus III : This cable can remotely fire your camera and control half-press function at the camera’s position. Use a ACC cable for best results and to have half-press capability from the transmitting radio. MultiMAX with no ACC port: Use this cable to remotely fire your camera and control half-press function at the camera’s position. MultiMAX with ACC port: This cable can remotely fire your camera but cannot wake up the camera in a remote zone. Use a ACC cable for best results FlexTT5: This cable can remotely fire your camera and control half-press function at the camera’s position, but your remote camera will not be able to relay an E-TTL signal to Speedlites. Use a ACC cable for best results. Learn more here Compatible with cameras using Nikons MC-DC2 remote terminal including: Nikon D7100 D750 D7000 D610 D5300 D600 D5200 D90 D5100 Df D3300 D3200 D3100 Not for Nikon D70s or D80-use NM4-P instead.
Synchrokabel zur Auslösung eines Elichrom Blitzgerätes mit einem PocketWizard Transceiver Geht für: Elinchrom Digital RX Series Elinchrom Digital Style Series Elinchrom Style S Series Elinchrom Micro AS packs Elinchrom Ranger Series Elinchrom Classic packs Description: This cable contains a pre-trigger switch. When enabled, the camera behaves as if the camera's shutter release button were held half-pressed continuously. This makes the camera respond more quickly and consistently, but also consumes the camera's batteries much more quickly. When disabled, this cable functions identically to the N-MCDC2. This P cable works with most PocketWizard radios. This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely. A standard cable works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only. A ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions, as well as relay E-TTL signals to compatible flashes when using FlexTT5s. Compatible with the following radios: Plus II: Use this cable to remotely fire your camera. Plus III : This cable can remotely fire your camera and control half-press function at the camera’s position. Use a ACC cable for best results and to have half-press capability from the transmitting radio. MultiMAX with no ACC port: Use this cable to remotely fire your camera and control half-press function at the camera’s position. MultiMAX with ACC port: This cable can remotely fire your camera but cannot wake up the camera in a remote zone. Use a ACC cable for best results FlexTT5: This cable can remotely fire your camera and control half-press function at the camera’s position, but your remote camera will not be able to relay an E-TTL signal to Speedlites. Use a ACC cable for best results. Learn more here Compatible with cameras using Nikons MC-DC2 remote terminal including: Nikon D7100 D750 D7000 D610 D5300 D600 D5200 D90 D5100 Df D3300 D3200 D3100 Not for Nikon D70s or D80-use NM4-P instead.
| Art. Nr. | PW MA1 |
|---|---|
| Marke | PocketWizard |
| EAN | 8935770016130 |
| Anschluss 01 | Mono Minijack (m) |
| Anschluss 02 | Elinchrom Amphenol (m) |
| Farbe | Schwarz |
| Kompatibilität | Elinchrom Classic packs Elinchrom Digital RX Series Elinchrom Digital Style Series Elinchrom Micro AS packs Elinchrom Ranger Series Elinchrom Style S Series |
| Länge | 30 cm |
| Typ | Kamerakabel |
Kabel für Elinchrom
Nur solange Vorrat. Dieses Produkt ist nicht nachbestellbar. Synchrokabel zur Auslösung eines Elichrom Blitzgerätes mit einem PocketWizard Transceiver Geht für: Elinchrom Digital RX Series Elinchrom Digital Style Series Elinchrom Style S Series Elinchrom Micro AS packs Elinchrom Ranger Series Elinchrom Classic packs Description: This cable contains a pre-trigger switch. When enabled, the camera behaves as if the camera's shutter release button were held half-pressed continuously. This makes the camera respond more quickly and consistently, but also consumes the camera's batteries much more quickly. When disabled, this cable functions identically to the N-MCDC2. This P cable works with most PocketWizard radios. This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely. A standard cable works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only. A ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions, as well as relay E-TTL signals to compatible flashes when using FlexTT5s. Compatible with the following radios: Plus II: Use this cable to remotely fire your camera. Plus III : This cable can remotely fire your camera and control half-press function at the camera’s position. Use a ACC cable for best results and to have half-press capability from the transmitting radio. MultiMAX with no ACC port: Use this cable to remotely fire your camera and control half-press function at the camera’s position. MultiMAX with ACC port: This cable can remotely fire your camera but cannot wake up the camera in a remote zone. Use a ACC cable for best results FlexTT5: This cable can remotely fire your camera and control half-press function at the camera’s position, but your remote camera will not be able to relay an E-TTL signal to Speedlites. Use a ACC cable for best results. Learn more here Compatible with cameras using Nikons MC-DC2 remote terminal including: Nikon D7100 D750 D7000 D610 D5300 D600 D5200 D90 D5100 Df D3300 D3200 D3100 Not for Nikon D70s or D80-use NM4-P instead.
Nur solange Vorrat. Dieses Produkt ist nicht nachbestellbar. Synchrokabel zur Auslösung eines Elichrom Blitzgerätes mit einem PocketWizard Transceiver Geht für: Elinchrom Digital RX Series Elinchrom Digital Style Series Elinchrom Style S Series Elinchrom Micro AS packs Elinchrom Ranger Series Elinchrom Classic packs Description: This cable contains a pre-trigger switch. When enabled, the camera behaves as if the camera's shutter release button were held half-pressed continuously. This makes the camera respond more quickly and consistently, but also consumes the camera's batteries much more quickly. When disabled, this cable functions identically to the N-MCDC2. This P cable works with most PocketWizard radios. This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely. A standard cable works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only. A ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions, as well as relay E-TTL signals to compatible flashes when using FlexTT5s. Compatible with the following radios: Plus II: Use this cable to remotely fire your camera. Plus III : This cable can remotely fire your camera and control half-press function at the camera’s position. Use a ACC cable for best results and to have half-press capability from the transmitting radio. MultiMAX with no ACC port: Use this cable to remotely fire your camera and control half-press function at the camera’s position. MultiMAX with ACC port: This cable can remotely fire your camera but cannot wake up the camera in a remote zone. Use a ACC cable for best results FlexTT5: This cable can remotely fire your camera and control half-press function at the camera’s position, but your remote camera will not be able to relay an E-TTL signal to Speedlites. Use a ACC cable for best results. Learn more here Compatible with cameras using Nikons MC-DC2 remote terminal including: Nikon D7100 D750 D7000 D610 D5300 D600 D5200 D90 D5100 Df D3300 D3200 D3100 Not for Nikon D70s or D80-use NM4-P instead.
| Art. Nr. | PW MA1 |
|---|---|
| Marke | PocketWizard |
| EAN | 8935770016130 |
| Anschluss 01 | Mono Minijack (m) |
| Anschluss 02 | Elinchrom Amphenol (m) |
| Farbe | Schwarz |
| Kompatibilität | Elinchrom Classic packs Elinchrom Digital RX Series Elinchrom Digital Style Series Elinchrom Micro AS packs Elinchrom Ranger Series Elinchrom Style S Series |
| Länge | 30 cm |
| Typ | Kamerakabel |
Erwägen Sie den Kauf dieses Zubehörs
Dies ist eine Einladung zur Offertstellung. Lieferumfang gemäss Herstellerangabe mit Herstellergarantie; Bilder und Texte können abweichen. Versandkosten basieren auf einem Gewicht von ?.
